Quomon - Time

Where can I get a Bluetooth Peripheral Device Driver?

sandea89 — Tue, 25 Sep 2012 09:05:44 GMT

I have windows vista on my notebook (a Vaio VGN-FZ31M).
It has a bluetooth device, but I don't know from which provider. How can I see that?
I tried to unistall it but I still get an installation notice all the time for the "Bluetooth Peripheral Device".
I suppose I need a driver, but I don't have any cd with that on.
I downloaded a driver from the sony website, but nothing is changed.
Do you know where I can find it, if that's the problem?

as long as we can find a suitable location

mimi20 — Mon, 27 Aug 2012 06:46:49 GMT

Where can I get a Bluetooth Peripheral Device Driver?I have windows 7 on my dell inspiron

abhijeetmatakar — Sun, 19 Aug 2012 06:56:53 GMT

Where can I get a Bluetooth Peripheral Device Driver?

I have windows vista on my dell inspiron laptop. i want to connect internet connection via my Nokia Bluetooth but but I get an installation notice all the time for the "Bluetooth Peripheral Device".
I suppose I need a driver, but I don't have any cd with that on.
Do you know where I can find it, if that's the problem?

How i install two windows operating systems (windows xp & windows 7) at a time on my desktop pc?

asif — Wed, 21 Mar 2012 17:13:06 GMT

i want to install two windows operating systems at a time on my Dell desktop pc but i could not do so uptill now

Why wont by computer comunicate with my printer?

skigirl1967395 — Sun, 26 Feb 2012 21:02:49 GMT

I bought a HP Laserjet Professional P1102w, and had previously installed it on my computer and it worked fine at first, then it stopped printing and the status just said error printing. that happened twice, and now it has stopped working again. I am trying to reinstall my printer to my laptop, but everytime that it is almost done, an alert pops up saying that the printer was able to connect to the wireless network, but my computer cannot communicate with my printer? i dont know what to do and could really use some help with this! i did try just starting over, but the same alert came up every time. Thank You so much!!

open internet explorer, a message comes up " internet explorer cannot display the webpage

kdwickham — Fri, 17 Jun 2011 01:28:46 GMT

I never had this problem before today. I tried doing system recovery, no luck. Every time I try to get to any webpage, the message comes up Internet explorer cannot display the webpage. I have connection to the internet, same connection I'm using for my lap top. My laptop is windows 7, my desktop is windows vista.Please help!!!

check disk error

mohsin360 — Thu, 09 Jun 2011 18:16:11 GMT

i have an error with my hard disk that it runs check disk when my windows starts every time then i format my particion of c and install a new window but the error still tease me what is the solution

why my computer is taking long time in starting.

khan — Sun, 22 May 2011 06:37:23 GMT

2 months ago

Error to run crystal report 9 at windows7

masumcse — Sun, 05 Dec 2010 11:56:35 GMT

i used crystal report 9 internally at vb6 project.when i make setup Package then it run good at xp,but when i run that project by make setup Package for windows 7(64bit) then exe run good,but when i try to run report then
i get a error message

err:
run time error 50003
unacceptable error

any one can help me for solve this

Error to run crystal report 9 at windows7

masumcse — Sun, 05 Dec 2010 11:55:04 GMT

I need a software program to complete a web based form. It has numerous radio buttons

ltrings — Wed, 24 Nov 2010 08:51:19 GMT

I am using a web based form to complete an insurance inspection report. There are numerous radio buttons to be checked and majority of the time they stay the same. I need a program that I can set so that it completes the form with out me having to manually scroll through and check each button

I want to populate the data from different text files to datagridview using microsft visual studio.

reyidio — Mon, 15 Nov 2010 15:50:13 GMT

Hi there. I saw that you are rank number 1. Congratulation.

I am very new to visual basic, I know that this question is very easy for you so I hope you can help me. I need to by using datagridview, I want to see the data inside the different text files. In the first column is where I will type in a word, then when I click the search button, the column 2 to 4 will populate. For column 2 it will show the position of the word in the text stream, (by the way I was able to find out how to input strings (sentences) in a text file using VB, it took me a very long time to find out), column 3 is the number of characters of the who text message (the word in the column 1 is the first word of the text message), then column 4 will show if the text message is active or delected, if the text message is active I can change it to deleted. If there is no text message that has a first word the same with the word I keyed in the column 1 a message will prompt that "no text message with that first word" (I think I know how do do it, probably I will use "If" statement then msgbox. I hope you can help me. By the way here is my email, you can also send your answer to this. rey.idio@yahoo.com ------ Thank you very much.

when transfering mail folders to another installation of mozilla dif comp. the folders are empty

repotsirc — Mon, 08 Nov 2010 18:08:30 GMT

So we got a new computer.

Working b/t windows xp and windows 7 if that becomes relevant.

Wanted to move all of the outlook information from the old machine to the new one.

Downloaded Thunderbird on the old on, and imported all of the info.

Which worked fine.

Went to the folder location for the user (example: 7d9gpe8p) and then I saved all of that folders contents onto a flashdrive.

Installed Thunderbird on the new machine. Dummy account. Went to the funny folder location replaced all of the files with those from the flashdrive.

Seemed to work, the account and all of the folders imported from the old machine's thunderbird, but now I noticed that the contents of those folders, only imported up to the letter G.

All of the folders starting with H-Z are empty. The folder is there but not the contained emails.

Checked the old computer, those emails did import from Outlook, but on some of them it appears if it is the first time opening the folder Thunderbird takes a minute to load them first.

Does anyone know how I can get that content easily to the new machine?
Does thunderbird only reference the files stored in outlook and not actually import a new copy?

Should I save them all individually to a flashdrive and manually move them over? is that even possible?

Let me know what you think?

Why my computer appear blue screen?

maggiena — Tue, 02 Nov 2010 07:31:54 GMT

It really make me crazy. My computer appears blue screen all the time. What the problem?

There is no good trade website?

galody — Fri, 29 Oct 2010 03:08:22 GMT

I do foreign trade, the electronic components industry, the need to find a better site. To have the kind of detailed customer information.I am looking for a long time, who can tell me?

my comp is running terrible. please help

jasonsathomecash — Wed, 22 Sep 2010 04:39:04 GMT

dell, desktop, around 2000 model. windows xp. no games or videos stored and only 7 music cd's and about a dozen pics. not many programs, also. yet my comp runs terrible. it's slow and does not run smoothly. programs are always "not responding". I run "super anti spyware" regularly because i spend alot of time online. my internet, comcast highspeed, runs fine.

Caps lock not working

collette — Sat, 04 Sep 2010 10:03:37 GMT

every time i press caps lock it takes the cursor out of the page and i have to click back in to continue typing. the same happens when i want to take caps lock off. i have a laptop (dell inspiron and have windos 7). please help its dirving me mad!

Thunderbird files

victorcattermole — Mon, 26 Jul 2010 22:36:02 GMT

I downloaded Thunderbird and it loaded all my mail from my webmail including 33,000 deleted mails, now it just freezes all the time, I cant access anything to delete the trash in Thunderbird, I tried uninstalling and reinstalling and it still picks up the same files. Any suggestions what to do?

I have a Sony Vaio. Where can I find the bluetooth peripheral device driver for it?

mailsreevas — Sun, 11 Jul 2010 06:13:55 GMT

I am using Windows Vista. Windows is searching online for device driver software for a very long time. So i cancelled it. Please let me know where i can find the driver software?

when we use prerender event in asp.net page?

jeetshah06 — Tue, 22 Jun 2010 08:44:51 GMT

how to work in page load time?

ZigBee Spy node..

chanrusnetmum — Thu, 20 May 2010 12:02:40 GMT

Basically what Im trying to do now is to build a table with the source ID and Destination ID on all transmiter and reciever.
The Spy reciever would only listens to the network and transmit data back to the computer hyperterminal via the com port.

problem is how do i edit this code so that a table with source ID and Destination ID table can be sent to hyperterminal
CODE:
/**************************************************************
* Device Program Operation
* June 30, 04
* This program performs the following:
* On power-up or reset, the LEDs will "walk" for 1 second to indicate
* the unit is a device. Next, the security number (i.e. SECURITY) LED
* is flashed on for 1 second to identify the selection.
* The unit then pauses and waits for the operator to select a desired
* u8Channel by pressing the corresponding pushbutton. The selected u8Channel
* will flash on the LED for 1 second.
* The unit again pauses and waits for the opertor to select the desired
* device number by pressing the corresponding pushbutton, The selected
* device number will flash on the LED for 1 second.
* Initialization of the device is now complete.
* To use the device:
* Any pushbutton may be depressed to toggle the status of the
* corresponding LED. This is for local control.
* If addressed (and if the SECURITY matches), the controller may
* request any LED to toggle, or the controller may request the status
* of an individual LED.
* The device will retransmit any data received and intended for another device
* within the SECURITY grouping, acting as a repeater.
* The device has a unique "security" number (i.e. SECURITY) and device
* number (i.e. u8DeviceNum).
* The program assumes all LEDs are connected to the same PORT.
* The target platform may be selected in the pub_def.h file.
* Many application specific details are in lighting_demo_device.h.
* Notes on the optional buzzer:
* If the optional buzzer is used, it may chirp on to indicate contention
* with another 802.15.4 device.
*
* $Author: a20639 $
* $Date: 2005/09/09 15:02:45 $
* $Name: $
**************************************************************/

/**************************************************************
* Includes
**************************************************************/
#include /* for EnableInterrupts macro */
#include "device_header.h" /* include peripheral declarations */
#include "pub_def.h"
#include "mcu_hw_config.h"
#include "MC13192_hw_config.h"
#include "simple_mac.h"
#include "bootloader user api.h"
#include "lighting_demo_device.h"

/**************************************************************
* Data definitions
**************************************************************/
byte gu8RTxMode; /* Current mode of the MC13192 XCVR */
byte LEDS; /* LED on/off information */
byte rxcount;

/**************************************************************
* Main Program
**************************************************************/
void main(void)
{
tTxPacket sTxPacket;
tRxPacket sRxPacket;
byte au8RxDataBuffer[26];
byte au8TxDataBuffer[26];

/* Initialize variables */
UINT16 u16LEDOldTime = 0;
UINT16 u16RTXOldTime = 0;
UINT16 u16PBOldTime = 0;
UINT16 u16OldTime = 0;
UINT16 u16NewTime = 0;
UINT16 u16LagTime1 = 0;
UINT16 u16LagTime2 = 0;
UINT16 u16Count = 0;
UINT8 u8PBState = 0;
UINT8 u8AppStatus = 0;
UINT8 u8GetLed = 0;
UINT8 u8Crap = 0;
UINT8 u8XcvrMode = 0;
UINT8 u8LEDStatus = 1;
UINT8 u8DeviceNum = 1;
UINT8 u8DeviceLed = u8DeviceNum;
UINT8 u8LightLed = 0x05; /* initial */
UINT8 u8Garbage = 0;
UINT8 u8Channel = 1;
UINT8 u8LastDsn = 0xFF;
UINT8 u8Count1 = 0;
UINT8 u8RfIcVersion=0;

sTxPacket.u8DataLength = 0;
sTxPacket.pu8Data = &au8TxDataBuffer[0];
sRxPacket.u8DataLength = 0;
sRxPacket.pu8Data = &au8RxDataBuffer[0];
sRxPacket.u8MaxDataLength = 30;
sRxPacket.u8Status = 0;

MCUInit();
MC13192Init();

/* Begin init */
rxcount = 0x00; /* Number of times device received the same request */

LED1DIR = 1; /* LED directions */
LED2DIR = 1;
LED3DIR = 1;
LED4DIR = 1;

MLMESetMC13192ClockRate(MC13192_CLKO_FREQ); /* 8 MHz bus clock (see lighting_demo_device.h) */
UseExternalClock();

/******************************************************************
To adjust output power call the MLME_MC13192_PA_output_adjust() with:

MAX_POWER (+3 to +5dBm)
NOMINAL_POWER (0 dBm)
MIN_POWER ~(-16dBm)

or somewhere custom ? (0-15, 11 (NOMINAL_POWER) being Default power)

******************************************************************/
//MLMEMC13192PAOutputAdjust(MAX_POWER); //Set MAX power setting
MLMEMC13192PAOutputAdjust(MIN_POWER); //Set MIN power setting
//MLMEMC13192PAOutputAdjust(NOMINAL_POWER); //Set Nominal power setting

/* Application init */
SRTISC=SRTISC&~0x07; /* Disable wake up timer. */
SPMSC2=SPMSC2&~0x03; /* Enable deep sleep mode stop3. */
TPM1SC = 0x0F; /* Timer divide by 128. (16uS timebase for 8MHz bus clock). */
PB0PU = 1; /* Pushbutton directions and pull-ups */
PB0DIR = 0;
PB1PU = 1;
PB1DIR = 0;
PB2PU = 1;
PB2DIR = 0;
PB3PU = 1;
PB3DIR = 0;
KBI1SC_KBIMOD = 0;
KBI1SC_KBI1E =0; /* Pushbutton interrupts not used */
PB0IE =0;
PB1IE =0;
PB2IE =0;
PB3IE =0;

#ifdef BOOTLOADER_ENABLED
boot_init(); //Initialize the bootloader.
#endif BOOTLOADER_ENABLED

#ifdef BOOTLOADER_ENABLED
boot_call(); //Check for user request to run bootloader.
//App will not return, if Bootloader is requested.
#endif BOOTLOADER_ENABLED

#if defined (AXM_0308C)
BUZZDIR = 1; /* Optional buzzer and off */
BUZZ = 0;
#endif
/* Enable all interrupts and ready to go */
MC13192_IRQ_IE_BIT = 1;
EnableInterrupts;
/* "Walk" LEDs to indicate this is a device. */
LedDrive(0x01);
MCUDelay (WALKON);
LedDrive(0x02);
MCUDelay (WALKON);
LedDrive(0x03);
MCUDelay (WALKON);
LedDrive(0x04);
MCUDelay (WALKON);
/* LEDs off for a short */
LedDrive(u8LightLed);
MCUDelay (LONGFLASHOFF);
/* Allow SECURITY LED to glow for a short. Indicates Group. */
LedDrive(SECURITY);
MCUDelay(LONGFLASHON);
/* Now all LEDs off. */
LedDrive(u8LightLed);
/* Wait for user to select the u8Channel. */
while ((PB0 == 1) && (PB1 == 1) && (PB2 == 1) && (PB3 == 1)); /* All PBs released */
MCUDelay(DEBOUNCE); /* PB pushed. Wait for debounce. */
if (PB0 == 0)
{
u8Channel = 1;
}
if (PB1 == 0)
{
u8Channel = 2;
}
if (PB2 == 0)
{
u8Channel = 3;
}
if (PB3 == 0)
{
u8Channel = 4;
}
while ((PB0 ==0) || (PB1 ==0) || (PB2 ==0) || (PB3 ==0)); /* A PB is still depressed */
MCUDelay(DEBOUNCE); /* All PBs released. Wait for debounce. */
LedDrive(u8Channel); /* Display selected u8Channel. */
MCUDelay(LONGFLASHON);
LedDrive(u8LightLed); /* LEDs off. */
/* Set u8Channel */
MLMESetChannelRequest(((u8Channel-1)<<2) + (u8Channel-1)); /* Set the selected u8Channel. */
/* Wait for user to select the u8DeviceNum. */
while ((PB0 == 1) && (PB1 == 1) && (PB2 == 1) && (PB3 == 1)); /* All PBs released */
MCUDelay(DEBOUNCE); /* PB pushed. Wait for debounce. */
if (PB0 == 0)
{
u8DeviceNum = 1;
}
if (PB1 == 0)
{
u8DeviceNum = 2;
}
if (PB2 == 0)
{
u8DeviceNum = 3;
}
if (PB3 == 0)
{
u8DeviceNum = 4;
}
while ((PB0 ==0) || (PB1 ==0) || (PB2 ==0) || (PB3 ==0)); /* A PB is still depressed */
MCUDelay(DEBOUNCE); /* All PBs released. Wait for debounce. */
LedDrive(u8DeviceNum); /* Display selected device number. */
u8DeviceLed = u8DeviceNum;
if (u8DeviceNum == 1) /* Set repeater TDMA values */
{
u16LagTime1 = 63; /* 1ms */
}
if (u8DeviceNum == 2)
{
u16LagTime1 = 250; /* 4ms */
}
if (u8DeviceNum == 3)
{
u16LagTime1 = 625; /* 10ms */
}
if (u8DeviceNum == 4)
{
u16LagTime1 = 1188; /* 19ms */
}
u16LagTime2 = 2563-u16LagTime1; /* 41ms - value */
/* Assumes total time for Rx extraction and Tx is 1-3mS */
/* Maximum lag is 4+3+10+3+19+3 or 42mS */
/* Minimum lag time is 1+1 or 2mS */
MCUDelay(LONGFLASHON);
LedDrive(u8LightLed); /* LEDs off. Initialization complete. */
/* Init timer vars and global LEDS */
u16LEDOldTime = MCUReadTmr1 ();
u16RTXOldTime = u16LEDOldTime;
LEDS = LEDPORT; /* Initialize LEDS to the actual port setting */
MLMERXEnableRequest(&sRxPacket, 0x); /* Activate the receiver */

/**************************************************************
* Main While Loop - Runs continously
**************************************************************/
for (;;)
{
/* u8PBState=0 is waiting for a PB to be pushed. */
/* u8PBState=1 is waiting for a PB high-to-low debounce. */
/* u8PBState=2 is waiting for PBs to ALL be released. */
/* u8PBState=3 is waiting for a PB low-to-high debounce. */
u16NewTime = MCUReadTmr1 ();
if ((u8PBState == 0) && ((PB0 ==0) || (PB1 ==0) || (PB2 ==0) || (PB3 ==0))) /* A PB is depressed */
{
u8PBState = 1;
u16PBOldTime = u16NewTime;
}
if (u8PBState == 1)
{
if ((u16NewTime-u16PBOldTime) > DEBOUNCE) /* H-L debounce complete */
{
u8PBState = 2; /* Update LEDS. A bit funky. */
if (PB0 == 0)
{
LED1 ^=1;
}
if (PB1 == 0)
{
LED2 ^=1;
}
if (PB2 == 0)
{
LED3 ^=1;
}
if (PB3 == 0)
{
LED4 ^=1;
}
u16PBOldTime = u16NewTime;
}
}
if (u8PBState == 2)
{
if ((PB0 == 1) && (PB1 == 1) && (PB2 == 1) && (PB3 == 1)) /* All PBs released */
{
u16PBOldTime = u16NewTime;
u8PBState = 3;
}
}
if (u8PBState == 3)
{
if ((u16NewTime-u16PBOldTime) > DEBOUNCE) /* L-H debounce complete */
{
u8PBState = 0;
}
}
if (gu8RTxMode == IDLE_MODE) /* RX is now done */
{
u16RTXOldTime = u16NewTime;
u8XcvrMode = 0; /* Assume packet not intended for us */
/* Check for code bytes match and successful packet reception */
if ((sRxPacket.u8Status == SUCCESS) && (au8RxDataBuffer[0] == 0xE1) && (au8RxDataBuffer[1] == 0xCC) && (au8RxDataBuffer[2] == SECURITY))
{
if (au8RxDataBuffer[3] == u8DeviceLed) /* Packet is for me. */
{
if ((au8RxDataBuffer[5] == u8LastDsn)) /* Re-received? */
{
rxcount++;
}
else
{
rxcount = 1;
u8LastDsn = au8RxDataBuffer[5]; /* Update last dsn */
}
if ((au8RxDataBuffer[7] == TOGGLECMD) && (rxcount == 1)) /* TOGGLE and not repeated */
/* Toggle selected LED */
{
if (au8RxDataBuffer[4] == 1)
{
LED1 ^=1;
}
if (au8RxDataBuffer[4] == 2)
{
LED2 ^=1;
}
if (au8RxDataBuffer[4] == 3)
{
LED3 ^=1;
}
if (au8RxDataBuffer[4] == 4)
{
LED4 ^=1;
}
}
u8XcvrMode = 2; /* ACKBACK required */
if (au8RxDataBuffer[7] == QUERYCMD) /* Just a query */
{
u8XcvrMode = 3; /* QUERYBACK required */
}
}
else /* repeat */
{
u8LastDsn = au8RxDataBuffer[5]; /* Update last dsn */
for (u8Count1=0; u8Count1 {
au8TxDataBuffer[u8Count1] = au8RxDataBuffer[u8Count1];
}
au8TxDataBuffer[sRxPacket.u8DataLength] = u8DeviceLed;
sTxPacket.u8DataLength = sRxPacket.u8DataLength+1;
u16NewTime = MCUReadTmr1 ();
u16RTXOldTime = u16NewTime;
while ((u16NewTime-u16RTXOldTime) < u16LagTime1)
{
u16NewTime = MCUReadTmr1 ();
}
MCPSDataRequest(&sTxPacket);
u16NewTime = MCUReadTmr1 ();
u16RTXOldTime = u16NewTime;
while ((u16NewTime-u16RTXOldTime) < u16LagTime2)
{
u16NewTime = MCUReadTmr1 ();
}
MLMERXEnableRequest(&sRxPacket, 0x); /* back to on */
}
}
else
{
u16Count = 0;
while (u16Count < SHORTFLASHCOUNT) /* Flash all LEDs on/off a few times to indicate conflict */
{
#if defined (AXM_0308C)
BUZZ = 1; /* optional buzz to indicate conflict */
#endif
u16OldTime = MCUReadTmr1 ();
u16NewTime = u16OldTime;
while ((u16NewTime-u16OldTime) < SHORTFLASHON)
{
u16NewTime = MCUReadTmr1 ();
}
#if defined (AXM_0308C)
BUZZ = 0;
#endif

u16OldTime = MCUReadTmr1 ();
u16NewTime = u16OldTime;
while ((u16NewTime-u16OldTime) < SHORTFLASHOFF)
{
u16NewTime = MCUReadTmr1 ();
}
u16Count ++;
}
MLMERXEnableRequest(&sRxPacket, 0x); /* back to on */
}
}
if ((u8XcvrMode == 2) || (u8XcvrMode == 3)) /* reply after a delay for TDD. Sends the u8LightLed on/off anyway */
{
u8XcvrMode = 0; /* When done, back to mode 0 */
u8GetLed = PackLed(au8RxDataBuffer[4]);
for (u8Count1=0; u8Count1 {
au8TxDataBuffer[u8Count1] = au8RxDataBuffer[u8Count1];
}
if (au8RxDataBuffer[7] == TOGGLECMD)
{
au8TxDataBuffer[7] = ACKBACK;
}
else
{
au8TxDataBuffer[7] = QUERYBACK;
}
au8TxDataBuffer[sRxPacket.u8DataLength] = 'D';
au8TxDataBuffer[4] = u8GetLed;
au8TxDataBuffer[6] = rxcount;
sTxPacket.u8DataLength = sRxPacket.u8DataLength+1;
u16NewTime = MCUReadTmr1 ();
u16RTXOldTime = u16NewTime;
/* Dwell for possible repeats. */
while ((u16NewTime-u16RTXOldTime) < DWELLTIME) /* 46mS */
{
u16NewTime = MCUReadTmr1 ();
}
MCPSDataRequest(&sTxPacket);
u16NewTime = MCUReadTmr1 ();
u16RTXOldTime = u16NewTime;
while ((u16NewTime-u16RTXOldTime) < DWELLTIME2) /* 44mS */
{
u16NewTime = MCUReadTmr1 ();
}
u16RTXOldTime = u16NewTime;
MLMERXEnableRequest(&sRxPacket, 0x); /* back to on */
}
}
}

/**************************************************************
* Function: LED driver
* Parameters: state. 1-4 is light only that LED. 5 is turn all off, 6 is all on.
* Return: none
**************************************************************/
void LedDrive (UINT8 state)
{
switch (state)
{
case 0x01:
LED1 = 0;
LED2 = 1;
LED3 = 1;
LED4 = 1;
break;
case 0x02:
LED1 = 1;
LED2 = 0;
LED3 = 1;
LED4 = 1;
break;
case 0x03:
LED1 = 1;
LED2 = 1;
LED3 = 0;
LED4 = 1;
break;
case 0x04:
LED1 = 1;
LED2 = 1;
LED3 = 1;
LED4 = 0;
break;
case 0x05:
LED1 = 1;
LED2 = 1;
LED3 = 1;
LED4 = 1;
break;
case 0x06:
LED1 = 0;
LED2 = 0;
LED3 = 0;
LED4 = 0;
break;
}
return;
}

/**************************************************************
* Function: LED state return
* Returns LED state. 0xFF is on, 0x00 is off.
**************************************************************/
UINT8 PackLed (UINT8 lednum)
{
switch (lednum)
{
case 0x01:
if (LED1 == 0)
{
return 0xFF;
}
else
{
return 0x00;
}
break;
case 0x02:
if (LED2 == 0)
{
return 0xFF;
}
else
{
return 0x00;
}
break;
case 0x03:
if (LED3 == 0)
{
return 0xFF;
}
else
{
return 0x00;
}
break;
case 0x04:
if (LED4 == 0)
{
return 0xFF;
}
else
{
return 0x00;
}
break;
}
return 0x55;
}

/**************************************************************
* Function: Received data handler
* Parameters: tRxPacket
**************************************************************/
void MCPSDataIndication(tRxPacket *sRxPacket)
/* Just a direct return. Main loop will handle it. */
{
}

/**************************************************************
* Function: MC13192 reset handler (not yet implemented)
* Parameters: none
**************************************************************/
void MLMEMC13192ResetIndication (void)
{
LED1 = 0;
LED2 = 0;
LED3 = 0;
LED4 = 0;
for(;;);
}

/**************************************************************
* Function: Read MCU timer.
* Parameters: none
* Return: 16-bit timer value.
**************************************************************/
UINT16 MCUReadTmr1(void)
{
UINT16 w; /* w[0] is MSB, w[1] is LSB */
((UINT8*)&w)[0] = TPM1CNTH; /* MSB */
((UINT8*)&w)[1] = TPM1CNTL; /* LSB */
return w;
}

/**************************************************************
* Function: Delay.
* Parameters: Delay u16Count
* Return: none.
**************************************************************/
void MCUDelay (UINT16 delay_t)
{
UINT16 u16MCUOldTime;
UINT16 u16MCUNewTime;
u16MCUOldTime = MCUReadTmr1();
u16MCUNewTime = u16MCUOldTime;
while ((u16MCUNewTime-u16MCUOldTime) < delay_t)
{
u16MCUNewTime = MCUReadTmr1();
}
}

Hard disk problem

jaibhoj — Sun, 09 May 2010 08:53:43 GMT

My sata hard disk not booting last time when i opened my computer found boot failer error i restarted my computer so many time but proble was still ther. Now i am trying for windows installation but it stop in the middle. kindly give me solution.

thanks

Where can I get a Bluetooth Peripheral Device Driver?

dcgrg — Sat, 08 May 2010 03:57:33 GMT

I have windows vista on my notebook (a HP Compaq dv6000). It has a broadcom bluetooth device, but I get an installation notice all the time for the "Bluetooth Peripheral Device".
I suppose I need a driver, but I don't have any cd with that on.
Do you know where I can find it, if that's the problem?

FireFox, IE, Chrome will not load certain websites

Bullet90 — Thu, 29 Apr 2010 13:41:14 GMT

None of my browsers will open certain websites. If I clear the cookies and cache, the pages in question will load once. After that, I get a "Timed Out" error. I have tried several methods, full scans with AVG, Malwarebytes, SpyBot, Ad-Aware and Super Anti Spyware. I recently had a Trojan in the fake program Win 7 Defender Pro. The Trojan was successfully removed but it has left me with faulty browsers. Also, firefox reinedirects sometimes when I click on a google search link. I usually have to copy link location, paste it in browser and then it will load. The re-direct sites are usually some kind of bogus search engine, which is adware, Im sure. I know this is a common problem but to this point, none of the resolutions have worked. I solved this one time before by changing the privacy settings to "Use custom settings for history". I am using the latest versions of all browsers and fully updated Win 7 Home.
Any Ideas??
Thanks in advance.

How do I turn off the automatic update of the date/time clock

morrism — Sat, 20 Mar 2010 02:53:33 GMT

I am running a home network, using 2 Dell computers. My internet connection is DSL through a Siemens Gigaset SE 567 modem. I have set the windows date/time clock to use the internet time up date option, which should happen once every seven days. I have also turned the time client function of the modem off. The clock still changes the date/time clock every 3 minutes. This causes a security program, which uses the date/time clock to make file headers,to crash

Whish Browser is best for windows XP:

athanato — Sun, 07 Mar 2010 06:48:18 GMT

Dear PC expert,
Currently I am using Internet explorer 8 and I was wondering if there is a better browser on the market: I was told to look into, Safari, Opera, Google chrome, Internet explorer 8?
I do appreciate for taking the time to give me your expert opinion.
Kindness regards
Athas

How to open multiple records/windows at the same time in a PHP/MySQL web application

hansabri — Fri, 26 Feb 2010 15:44:14 GMT

Hello,
Thank you in advance for trying to help me.

I'm trying to develop a basic web application for my work place with php & mysql.

I would like to know how can I open multiple projects from the database at the same time.

I am not an expert. I have an idea that I can use Session control. I don't know if it possible to have many sessions open for each project at the same time.

Or there could be something basic which I don't know.

Any help towards this would be much appreciated.

Regards,
Sab

Hello` I am having problem to connect my wireless printer to the laptop

123djroy — Sun, 21 Feb 2010 09:57:25 GMT

Right I did everything by the book . but the result is some time is connect and other lost the connection very easily.the printer is Epson Stylus SX510w/TX550Wseries. The laptop Dell Celeron Intel 1GBram .
The printer SSID does not come out in the list of network. this is my email
djroyfurriello@yahoo.com please can you advice me on this matter?? thank you

Where can I get a Bluetooth Peripheral Device Driver?

ronakp2410 — Mon, 28 Dec 2009 14:21:24 GMT

I have windows vista on my notebook (a HP 550). It has a broadcom bluetooth device, but I get an installation notice all the time for the "Bluetooth Peripheral Device".
I suppose I need a driver, but I don't have any cd with that on.
Do you know where I can find it, if that's the problem?

i have 20 windows forms in c#.if i want any time only one open what should i do?

dhavalmalhotra — Tue, 08 Dec 2009 09:15:28 GMT

i want other forms closed and only one open.

How to know the hard-disk problem

jayak531 — Tue, 01 Dec 2009 09:29:18 GMT

How to know the hard-disk problem..?
Every time i used to format the files are corrupted...
How to solve the Hard-disk problem like bad sectors....?

Graphic design, logos and layouts for my website on a shoestring budget- (Programming not needed)

JuryResearchPro — Wed, 18 Nov 2009 20:11:27 GMT

I have access to all Microsoft programs and photoshop. I am working with an advanced programmer but I am trying perform the design tasks as much as possible.

I am a beginner, but a quick learner with access to many programs. What is the best approach to creating a master template design that I can then code in HTML and give to my programmer.

I have the time to do this myself if I can find a way to get proficient at graphic design.

I realize that this is a huge undertaking and that graphic design is its own profession that people spend years learning.

To clarify, I am an entrepreneur and I like doing more with less. Do you guys know of any tips, tricks, programs or gurus you can point me to to help me keep my graphic design and marketing materials creation in-house?

Also, if I am being naive please tell me how and why. I am running a business and I take this very seriously. Thanks for your input.

Where can I get a Bluetooth Peripheral Device Driver?

enaselsify — Thu, 05 Nov 2009 09:23:20 GMT

I have windows 7 on my notebook (Compaq Presario CQ61-360EV ). It has a broadcom bluetooth device, but I get an installation notice all the time for the "Bluetooth Peripheral Device".

Where can I get a Bluetooth Peripheral Device Driver?

erum saleem — Thu, 01 Oct 2009 18:23:12 GMT

I have windows vista home premium on my notebook (a HP pavilion dv6). I have a bluetooth USb Dongle device, but I get an installation notice all the time for the "Bluetooth Peripheral Device".
I suppose I need a driver, but I dont have any cd with that on.
Do you know where I can find it, if that's the problem?

Session State

tedgreen — Fri, 22 May 2009 16:33:12 GMT

I have a multipage shopping cart application. On page one the shopper selects an item and quantity, then click a button to add item to cart. On cart page are buttons to return to add more items or to checkout. When the user chooses to checkout I show a page to collect first & last name. I then want to allow the user to continue shopping. When the user chooses to checkout the next time I want to have the name info entered previously. I understnd how to check if the session item is null for the first pass. I build try to retrieve the sesion data with commands below.

Session["FName"] = FName.Text; - move item to session

FName.Text = (string)(Session["FName"]); - get item from session

Have not been able to see data when returning from select item page of project...I am trying, but a bit confused in using prerender and that may be part of the problem....

LOST!!!

I have forgotten my securtiy questions answer for yahoo.. could you please assist

nesannaidoo — Tue, 14 Apr 2009 16:55:16 GMT

a very long time ago

Where can I get a Bluetooth Peripheral Device Driver?

tamkamy — Sun, 22 Mar 2009 02:52:13 GMT

Where can I get a Bluetooth Peripheral Device Driver?

I have windows vista on my notebook (a asus X61 Gseries). It has a broadcom bluetooth device, but I get an installation notice all the time for the "Bluetooth Peripheral Device".
I suppose I need a driver, but I don't have any cd with that on.
Do you know where I can find it, if that's the problem?

i have big problem with IE7 with windows vista every time i gets not responding how can i fix this

kng10 — Fri, 20 Mar 2009 01:44:36 GMT

when i open the IE7 every time it is become not responding or when im using it also happend how to solve this?

MultiThread in Asp .net

abhiprakash1979 — Wed, 18 Mar 2009 10:29:32 GMT

Sir, I want to create two thread in class file. i am open my website then that two thread is running.
1) one thread is work continue write in one file and second thread in also write in second file with time. but no effect on my aspx page.

2) when I am close my application that that time both thread is stop but i am want to continue run

so what i do. & give any example (i am develop serial communication with RF)